1. To use this device, a Hub that supports Zigbee3.0 is required. Please add the Hub to the APP first according to the instructions. Please open the battery cover with the provided opening pick. 2. Open the app, click "+" in the upper right corner of the homepage, enter the "Add Accessories" page, select "Cube T1 Pro", 3. Select the Hub to be connected, and follow the instructions on the APP. Press and hold the reset button for 5 seconds and wait for the voice prompt of the Hub that indicates the connection is successful.
Open the battery cover of the Cube T1 Pro with the opening pick, take out the battery, replace it with a new CR2450 battery (please note that the battery must be put with the positive side facing up), and put the battery cover back.
1. Flip 90°: Take the Cube and flip 90° 2. Flip 180°: Take the Cube and flip 180° 3. Tap Twice: Take the Cube and tap twice 4. Push: Push the Cube on a flat surface 5. Rotate: Rotate the Cube on a flat surface 6. Shake: Take the Cube and shake it back and forth twice quickly 7. Triggered after one minute of inactivity: the cube is moved after one minute of inactivity
1. Face X is up: Put the face X (1～6/any) of the Cube up 2. Shake: Take the Cube and shake it back and forth twice quickly 3. Pick up and hold: pick up the Cube and keep it still 4. When the face X of the Cube is up: face X of the Cube is now facing upwards. 5. Triggered after one minute of inactivity: the cube is moved after one minute of inactivity
1. It may be too far away from the Hub. Please try to put it closer to the Hub. 2. Wireless network interruption or other reasons may cause the Hub to be offline. 3. The battery may be dead. Please replace the battery and try again.