Smart Gas Detector
Smart Gas Detector
The large role of gas safety.
Zigbee 3.0 with Repeater Functionality
Apart from the benefits of Zigbee 3.0 technology, it will increase your Zigbee network's stability. Aqara devices that sometimes could not reach the hub will reconnect to the Gas Detector automatically.
Local and Remote Alerts
The Gas Detector is able to trigger all of your siren-equipped Aqara Hubs automatically via the Alert System, and push notifications (including Critical Alerts) to your phone or any other device where the Aqara Home app is installed.
Without any extra actions needed, one Gas Detector will trigger the other Aqara Gas Detectors to sound an alarm together for better alarming, even if the hub goes down.
Built-in Siren of up to 85dB**
The device has a built-in powerful siren and a colorful LED that will blink and allow you to hear it even if you are in another room, sleeping or listening to loud music.
* Aqara hub is required
** The decibel measurements may vary significantly depending on the distance and the environment
Compatible with most popular smart home ecosystems. HomeKit, Yandex Alice*, IFTTT, and more are supported. You can just connect it to the Aqara Hub and bind the account.
* Some ecosystems may be unavailable at the time of launch.
Protects you and your family from a gas leak, no matter if you are home or away
· Light and sound alarm
The built-in siren of up to 85dB will allow you to hear it even if you are in another room, sleeping or listening to loud music. Also, the device has a colorful LED that will blink in red in case of an alarm.
· Get notifications from your phone
The detector will push notifications (including Critical Alerts) to your phone or any other device where the Aqara Home app is installed, so you can protect your family when you are away.
· Group binding and hub alarming
The detector is able to trigger all of your siren-equipped Aqara hubs automatically via the Alert System, and trigger other Gas Detectors to sound without any extra action, even if the hub goes down.
Disarm the Siren Easily
In case the detector was triggered, you will be able to check if there is any danger and disarm it easily. Unlike the traditional alarms, you can use both the Aqara Home app or other Aqara devices to do it.
IF: the Siren is armed
THEN: you can disarm it by pressing a Mini Switch or showing an “OK” gesture to the Camera Hub G3
Compact and premium design, with built-in intelligent processor and high-end sensor.
Configure smart home automations with Aqara or third-party devices
IF a gas leak is detected
THEN the smart valve will shut the gas flow off
* A valve controller with the compatibility of supported third-party ecosystems. Alternatively, an Aqara Smart Plug or Single Switch Module can be used with a non-smart valve controller.