Outdoor Plug H2 EU: Plug into the great outdoors with energy tracking and automations.

Outdoor Plug H2 EU

Plug into the great outdoors with energy tracking and automations.

Buy Now

Two Protocols, No Compromise

The device features dual protocol support: in Thread mode, no hub is required to connect to third-party Matter ecosystems*, while Zigbee mode** allows for exclusive Aqara functionalities. It also supports backward compatibility with the classic Aqara Zigbee hubs without compromising Matter support. You can switch between desired protocols based on preference.

Matter over Thread Support *

Connect to all major platforms as long as you have a Matter controller and a Thread border router.

Zigbee Support for Aqara or Matter**

Keep your setup and expand your options: Zigbee works with existing Aqara hubs for easy, reliable integration, and you can bring this device into your preferred ecosystems via Matter Bridging (using the same Aqara Hub) for immediate cross-platform control.

* To use the device with a particular Matter ecosystem, a Thread-enabled Matter Controller of this ecosystem is required. 
** Aqara Zigbee hub required

Smarter On/Off for Your Outdoor World

Take control beyond your front door. From lighting up the holidays to powering your patio, these outdoor smart plugs let you automate, schedule, and remotely manage anything plugged in.

Insightful Data You Can Use

Let power insights drive your schedule. Automatically run pumps, heaters, and chargers only when needed to help cut wasted energy and lower monthly bills*.

Power Monitoring and Automations

Monitors power in real-time, displaying daily and monthly use, with intuitive charts for personal energy management. Real-time power rises/drops can be further integrated into automation triggers.

Auto-Power Cutoff

Timer or charging protection* helps you save energy by switching off appliances that may be consuming electricity while on standby. Also, it cuts power once charging is complete.

*When charging protection is enabled, the plug automatically shuts off after 30 minutes of power draw below 3w.

Low Idle Consumtion

When idle, it consumes no more than 0.4W, a figure basically negligible for your energy-efficiency.

* Savings vary by device, usage, and local energy rates.

Safety That Reacts

It's kid-proof and child safe as it prevents accidental presses with the child lock. It automatically cuts power when overloaded or overheated, stay safe from electrical hazards without lifting a finger.

16A Powerful Load

Handle high-power appliances up to 16 A without worrying about overloading the plug: it's a plug for almost everything: from table lamps to 3680W heaters, this 16 A plug covers most household devices.

Child Lock Function

1. Function: Disabled by default. When enabled, the physical button* on outlet is disabled**, preventing it from toggling the plug (i.e., the button won't turn on/off device).  

2. Remote Control: When enabled, users can still gain control via automation/app/voice

Overheating and Overload Protection

The outlet will automatically turn off when overloaded or if the temperature reaches 80°C or higher.

Set Your Load Limit

The maximum power on socket is configurable***, your devices stay within a safe energy range at all times.

* The button can still be used to trigger a network or factory reset.  
** If you want to completely disable all triggering , you can use device removal protection (only using Zigbee). 
*** Zigbee mode and Aqara hub are required to achieve this functionality.

Configurable Status Light

Always know what's on at a glance. You can customize the indicator light to confirm power status at night, or turn it off to keep your outdoor setup looking clean and unobtrusive. Ideal for patios, driveways, or anywhere where both visibility and aesthetics are important.

LED in Automation*

"Turn on/off indicator light" serves as a THEN automation.**

Subtle LED Configuration*

When enabled, LED can sync with switch state, or reverse. When disabled, the indicator light will stay always off.**

* Zigbee mode and Aqara hub are required to achieve this functionality.
**The LED indicator configuration is only available in the Zigbee mode, Thread support is coming in a future update.

IP44 Water Ressistence

Rated IP44 to withstand splashing water and solid objects >1mm. Ideal for gardens, patios, or balconies in the rain or shine.

* IP44-rated plug required for full waterproof protection.

Smart Automation

Pool Pump Off-Peak Saver

WHEN Time is 2:00 AM (off-peak start)

IF Pool pump has not run in the last 12 hours

THEN Turn on plug (pool pump) for 4 hours, then turn off

Patio Heater Guest Warm-Up

WHEN Person detected in patio

IF Time is between 6:00 PM and 11:00 PM

THEN Turn on plug (patio heater) for 30 minutes

Two Product Versions to Choose From