Aqara A100 Zigbee Edition
FAQ
1.What does the standard package of Aqara Smart Door Lock N100 include?
Open-hole drawing x 1
Manual x 1
Front panel x 1
Back panel x 1
Lock body x 1
Door buckle plate x 1
Door buckle box x 1
Some fixed screws
Mechanical lock cylinder x 1
Mechanical key x 2
AA battery x 8
Large square shaft x 1
Small square shaft x 1
Panel screw x 2
Stud x 2
Fixed screw x 2
2.What is the security level of Aqara Smart Door Lock N100?
3.What is anti-peephole unlock function? Does Aqara Smart Door Lock N100 have anti-peephole unlock function and how does it work?
② Aqara Smart Door Lock N100 has anti-peephole unlock design. When you want to open the door, you must press the anti-peephole button on the indoor handle and push down the door handle to unlock the door.
4.What unlocking methods does Aqara Smart Door Lock N100 support?
5. How to register a fingerprint?
①After installing the Aqara Home app on the mobile phone, please add and connect the door lock, and then register a fingerprint according to the operation prompts of the app;
②After opening the back panel of the door lock, please short press the Set button above the battery compartment of the door lock and register a fingerprint according to voice prompts (you need to add the door lock through the Aqara Home app and then enable the Local Settings function).
6.How many fingerprints can be registered in Aqara Smart Door Lock N100?
7.How to deal with the issue that the fingerprint fails to be registered?
2. During the process of fingerprint registration (you need to register the fingerprint 7 times to complete its registration successfully), please fully press your finger on the fingerprint recognition area, and try to change the fingerprint registration angle according to the voice or app prompts (do not repeat the same angle);
3. For a better unlocking experience, it is recommended to register the thumb.
8. Does Aqara Smart Door Lock N100 have anti-trial unlock function?
①Aqara Smart Door Lock N100 adopts PB in-depth customization algorithm, which can effectively prevent unlocking the door with fake fingerprint;
②After fingerprint recognition fails 5 times continuously, the door lock will trigger the local alarm (the door lock will play an alarm sound and turn on alarm light), lock the fingerprint recognition function, and send an alarm notification to the app;
③Aqara Smart Door Lock N100 fingerprint module adopts the latest self-learning algorithm. The more frequently it is used, the more sensitive it is.
9.How many digits of unlocking password does Aqara Smart Door Lock N100 support? Does it support virtual password?
10. How many passwords can be registered in Aqara Smart Door Lock N100?
11. How many types of temporary password does Aqara Smart Door Lock N100 support?
① After the door lock is added to the Aqara Home app, one-time temporary password can be created anytime and anywhere (Bluetooth and hub are not required to be connected with the door lock.). One-time temporary password can only be used once after being created, and the validity period is within 20 minutes.
② Periodic temporary password does not support remote creation and can only be created when the Bluetooth of the mobile phone is normally connected with the door lock. Periodic temporary password (nanny password) can be set to be valid within a specified time period (for example: 10:00~11:00), or certain days of every month or week. The temporary password can only be used during the valid time period.
12. How to deal with the issue that the keyboard is locked when I forget the password to cause multiple input errors?
13.How many NFC cards does Aqara Smart Door Lock N100 support?
14.Does Aqara Smart Door Lock N100 have remote unlock function?
15.What is anti-tailing?
16.How to lift the handle to lock the door?
17.What is locking from inside function?
18. If the door is locked from inside, how to open it outdoors?
19.What states of the door can be detected?
20.When the door is not closed or locked, why is there no alarm sound or push notification?
21. Under what circumstances will Aqara Smart Door Lock N100 trigger alarm notification function?
The door is almost closed; the door is not closed (alarm notification function needs to be enabled in the app); the door is not lifted to be locked or locked from inside (alarm notification function needs to be enabled in the app); the door lock is pried; the battery is low; and the door fails to be unlocked with password, fingerprint or NFC card multiple times.
22. How to supply power for Aqara Smart Door Lock N100?
23.What is the battery life of Aqara Smart Door Lock N100?
Note: The battery life is measured by Lumi Lab under the conditions of using 8 original batteries and simulating the door opening 10 times a day (without using double-recognition mode) at room temperature of 25℃.
24. How to deal with the issue where Aqara Smart Door Lock N100 runs out of power?
25. How to connect Aqara Smart Door Lock N100 to Zigbee Hub?
26.What are the functions of Aqara Smart Door Lock N100 after connecting to Zigbee hub?
27.What software platforms can N100 be added to?
Aqara smart door lock A100 Zigbee supports fingerprint unlocking, password unlocking, card unlocking, temporary password unlocking, mobile phone unlocked via Bluetooth, HomeKit unlocked via Bluetooth, and emergency key unlocking, a total of 7 unlocking methods.
Aqara smart door lock A100 Zigbee can record up to 50 fingerprints.
There are two ways to enroll fingerprints:
1. After installing the Aqara Home App on the mobile phone to add a door lock and connect the door lock, enter fingerprints according to the operation prompts of the APP.
2. After opening the rear panel of the door lock, short press the setting button above the battery compartment of the door lock, and enter fingerprints according to the voice navigation prompt (you need to add the door lock through the Aqara Home App first and then enable the local setting function).
Please make sure your finger is not dirty, too wet or too dry, and press your finger completely on the fingerprint recognition area to try again. If the fingerprint recognition fails continuously until the fingerprint identification is locked, you can unlock it with a password first, delete the fingerprint on the App and re-enter it. When entering fingerprints, you can enter multiple groups to avoid verification failure caused by a single finger fingerprint problem.
Aqara smart door lock A100 Zigbee supports the setting of 6-10-digit unlock passwords, and supports 20-digit virtual-digit passwords (the virtual-digit passwords include 6-10-digit unlock passwords, and the combination of unlock passwords and virtual-digit passwords is within 20 digits) . (*Dummy password refers to adding any garbled characters before or after entering the correct unlock password to prevent others from peeping when entering the password)
Install the Aqara Home App on your mobile phone and add a door lock through the App, enter the door lock page, press and hold the unlock icon, and then press down on the door handle to unlock.
And with the use of Aqara hub, it can be unlocked remotely.
Aqara smart door lock A100 Zigbee has a lift-up quick lock design, which can be quickly was locked indoors or outdoors by lifting the door handle to improve the security level of the door lock.
Aqara smart door lock A100 Zigbee alarm reminders are as follows:
The door lock was picked, the battery is low, and the authentication failed many times.
The theoretical battery life of the door lock is 18 months, and the actual battery life will vary depending on the actual use environment. The performance of the battery in a low-temperature environment will decrease, and the battery life will be shortened.
Note: The battery life is measured by Lumi Lab under the conditions of using 8 original battery, simulating opening the door 10 times a day (not double verification mode), and normal temperature 25°C.
If the battery of the door lock is out of power, the Aqara smart door lock A100 Zigbee emergency charging interface can be used to supply power and unlock the lock. The emergency charging interface is in the form of Type-C and is located at the bottom of the outer panel of the door lock. It can supply power to the door lock.
Support "heaven and earth hooks".
Aqara smart door lock A100 Zigbee is suitable for most wooden doors, iron doors, and security doors with a thickness of 40~120mm on the market.
The Aqara smart door lock A100 Zigbee does not support the Bawang lock body for the time being. It can be installed with the standard lock body and the Bawang lock body face plate.
Aqara smart door lock A100 Zigbee supports Bluetooth 5.0 and Zigbee 3.0.
Administrators have the following permissions:
You can enter the local setting mode of the door lock through the administrator's fingerprint or password to set, you can restore the door lock to factory settings, you can unlock the door from the locked state outdoors, and you can also unlock it daily.
Ordinary users can be set, and the permissions of ordinary users only support daily unlocking.
Open the rear cover of the door lock, find the reset button under the battery compartment, press and hold it for more than 5 seconds to verify the administrator's identity according to the prompt, and then the door lock can be reset.
The smart door lock A100 Zigbee can be added to Aqara Home APP and HomeKit at the same time.
The dry battery voltage of the door lock needs to reach 1.5V. If the actual battery voltage purchased by the user is lower than 1.5V, it may cause the low battery warning to appear after the new battery has been used for a few days.
